Skip to content

Aerated Concrete Connectors

What Is an Aerated Concrete Connector?

Anchor plates (also known as aerated concrete connectors) are fastening elements that secure walls to columns or to the joints where the wall is built. Their “L” shape makes them easy to apply where aerated concrete blocks or bricks meet. They help preserve the integrity of the walls in the structure and increase its strength and safety.

How Is an Aerated Concrete Connector Used?

They must be applied in the number and thickness specified in the project. In general, one connector is used on each side for every 3 courses of bricks or aerated concrete blocks, but the quantity may vary according to project requirements. They must be nailed into the concrete with a nail gun, leaving no gaps.

Material

Galvanized Steel

Thickness range

0.50 - 2 mm

Length range

45 - 200 mm

Standard

TSE EN 14195

Where Are Aerated Concrete Connectors Used?

Aerated concrete connectors are used in almost all reinforced concrete buildings. Their purpose is to fix the walls to the main structure so that, in an earthquake or any situation that could compromise the rigidity of the building, the integrity of the walls is preserved. This keeps damage to the structure low and, if damage does occur, prevents people’s escape routes from being blocked. For this reason, they are used in every concrete structure we see around us, commercial or residential, and are especially important because Türkiye lies in an earthquake zone.

Product Features

Aerated concrete connectors are manufactured from galvanized raw material in thicknesses from 0.50 mm to 2 mm. The general width is 40 mm, the short leg is 45 mm long and the long leg is 200 mm long. They can be manufactured in different sizes and thicknesses according to special project requirements. The use of galvanized raw material provides protection against rust.

SizeThicknessUnits per Package
40 x 45 x 150 mm0.50 mm500
40 x 45 x 150 mm0.60 mm500
40 x 45 x 150 mm0.70 mm500
40 x 45 x 150 mm0.80 mm500
40 x 45 x 150 mm1 mm250
40 x 45 x 150 mm1.2 mm250
40 x 45 x 150 mm1.5 mm250
40 x 45 x 150 mm2 mm250

Galvanized steel body

High corrosion resistance and long service life. Suitable for indoor and outdoor projects.

Wide range of lengths

Eleven standard lengths from 7 cm to 60 cm; custom sizes can be produced to order.

In-house mold design

All molds are designed and manufactured at Henaks; consistent tolerances and high-volume production capacity.

TSE EN 14195 compliant

Full compliance with the European standard for metal framing components for plasterboard systems.

CE Marking

CE certification under the EC Construction Products Directive, in accordance with the TSE EN 14195 standard.

ISO 9001:2015

Quality management system. IQR / IAS accreditation. Validity is maintained through annual surveillance audits.

ISO 14001:2015

Environmental management system certificate. Minimizing environmental impact in production processes.

ISO 45001:2018

Occupational health and safety management system certificate.

Pacific Cert – Mounting Bracket CD

Product-specific factory production control (FPC) audit. Certificate no: PC-0220-1075.

FPC Audit

Factory production control is audited annually by Pacific Cert; compliance with the requirements of TSE EN 14195 is verified.

Would you like a price quote for your project?

Leave your number and our production specialists will contact you as soon as possible.